click
Share |

Saturday Feb 04, 2012

:: Installation :: Playstation :: Modclip ::

:: modclip installation ::


ModClip
Keys:

 

Circle = Select (or Forward)
X = Cancel (or Back)
Triangle = Delete
Square = Edit Codes

-

Normal Start:
  Start Game - This Starts normal games with no codes, just like the playstation would if the MODCLIP was not in the system except it also by-passes the white and black screens.
-
Start game with par (code):
  This will load the game using the codes you have selected. The currently selected cheat title appears at the bottom of the menu.
-
Edit Par (select code):
 

This takes you to a list of all the codes that are in the MODCLIP’s memory. Move up and down on your controller to highlight a game of your choice and press the "O" key. This will bring you to a list of code’s for that game. Move up and down to highlight a code, press the "O" key to select (or unselected) a code. The "+" symbol will show up to let you what code is active. 

(if game does not load with cheat the code is bad or does not work with your version)
(search the net for a new code)
(see the list of code sources in client section)
-
Select Edit Par:
 

2. Select "add new game" by hitting "O" button again.
3. Using "O" to select the letters enter the game name and then hit "X" button.
4. Select save by pressing "O" button.
5. select new code then press "O" button
6. Enter the name of the cheat "example NEVER DIE" then hit "X" button.
7. Then select code area by pressing the "down arrow" button then hit "O" button.
8. Enter code using "o" button then hit "X" and "X" button again, then select save by pressing "O" button.

There are code’s coming out for new games all the time. You can use  "action replay", "gamebuster" and most "game shark"codes found on the Internet and in magazines. First go into SELECT CHEAT CODE and go to new game and Press "O". Go through the steps (enter name, master code – not necessary, type of code, the actual code) hit "X" each time to save.  When entering game titles the title must end with "-USA" for USA games, "-JAP" for Japanese titles and "-UK" for European titles.
-

Delete a Code:
Highlight any code you wish to delete and the "triangle" key, Then hit "X" to confirm the delete.
-
Memory Manager:

This section works essentially the same way as the PlayStation's built-in Memory Card Manager, but is faster and easier to navigate.

1. COPY - Copy a single block
2. COPY ALL - Copy the entire memory card
3. DEL - Erase a single block from a card - Yes/No - Defaults to No
4. DEL ALL - Erase the entire memory card - Yes/No - Defaults to No
5. Exit
-

V-Ram image viewer:

This will view the contents of the PlayStation's VRAM at the time RESET was pressed.

Directional Pad - Pan around
L1 - Increase horizontal resolution
R1 - Decrease horizontal resolution
L2 - Toggle vertical resolution (240/480)
R2 - Toggle bit depths (16/24)
Triangle - Move status window
O - Fast Pan (when used in combination with directional pad)
X - Exit
-

CD-ROM Viewer Plus (a file explorer):

This lets you view the computer files of the game that is in the playstation, you can find and start files that contain movie and sound.

PLAYING GAME MOVIES & MUSIC:

STR / MOV - Streaming Movie (Game Cinema)
XA / XA1 - PlayStation Audio (Game Music)

EXE - Program File Clicking on a compatible filename will bring up a list of the file's contents. You may play any movie or audio files contained within by highlighting a selection and pressing "O". The "Triangle" button analyzes the currently selected file.
-

Special Notes:
Some of the cheat codes are made for Japan Games; you may want to delete them.
-
Play Import and Backup Games:

(the steps below are not required with the solder in MultiChip for the psone / 9001)

First setup your playstation to "think" the door is always closed by installing supplied spring:



Make sure the spring is down all the way , if it is not the disk wont spin.Use the custom made spring that we supply at no charge as shown in picture above.

  • Insert any original game or the "demo disk"
  • When the disc stops spinning (after about one second you can leave the lid up and watch), remove your "boot disc" and insert the import/backup you wish to load.
  • Select either START GAME or START GAME WITH CODES to load. Your import/backup will now play! (you can now close the lid)

That’s it! All your games should load up perfect!
-

Playing multi disk Import and Backup Games:

There are 2 ways to boot up the second CD-R or import disk.

  • You can save game information from the end of disk one onto your memory card and then boot up disk two from the memory card (recommended way).

  • Or if you don't have a memory card or a game that saves at the end of disk one you will have to do the following:  When prompted for the 2nd disk remove Import or Backup disk 1 and insert the demo disk (any black bottom disk will do fine but the demo disk works the best) , decompress the spring for a second  and then uncompress the spring so the playstation "thinks" that you opened the door for disk 2,  press the start button, allow the demo disk to spin for about 1 second then remove the spinning disk and replace it with the import disk 2 or CD-R disk 2. The second disk will boot up perfectly! If it does not work on the first attempt try again...It will.

That's it!

If you have problems booting up your CD-R disks and Imports then the problem could be:

A. You are not backing up your disks correctly. We suggest using CD-R WIN by http://www.goldenhawk.com/ for backing up your disks.
B. Your playstation has an old or worn lens which is having problems reading CD-R media. This often happens when using Gold, Yellow, Silver, and light green media (dark green is ok). We suggest using Blue media by TDK or Verbatim.
C. Try using a different black disk to boot up the game as some black disks don't make good bootup disks. The Demo disk included with your playstation should work with every game however if you have any troubles please try another black disk as the boot disk.
-

***READ CAREFULLY*** Switch From NTSC to PAL: DON'T SWITCH FROM NTSC TO PAL UNLESS YOU HAVE A PAL TV AND A PAL PLAYSTATION!!!! If you switch from NTSC TO PAL  you might damage your game-enhancer!!!! If you live in the USA you do NOT want to switch from NTSC to PAL for ANY reason!!!! If you live in the USA/Canada YOU DO NOT HAVE A PAL TV!!!!  Only if you have a PAL TV and  PAL Playstation and live OUTSIDE of the USA/Canada do you want to do the following -  Press L1, SELECT AND then press"O" to select.

IMPORTANT: The primary intended purpose of this device is the use of CHEAT CODES  which allows a user to have INFINITE LIVES, UNLIMITED ENERGY, EXTRA SCENES, HIDDEN LEVELS, SECRET PASSAGES and HIDDEN PROGRAMMER TRICKS.

ip: , rendered in 0.0014 sec.

© Modchip Inc. All rights reserved.

via e-mail